INSTALL: 11-Gallon Water Tank for Toyota Tacoma

Last updated: October 29, 2026

How Do I Install the GoCode 11-Gallon Water Tank on a Toyota Tacoma?

Install the GoCode 11-gallon water tank on a Tacoma by sliding the included slide nuts into your rack rail, then bolting L brackets to the tank’s preset threaded inserts. The tank holds 11 gallons of fresh water, enough for a simple spray setup whether you’re camping or rinsing off gear on a job site.

Before You Start

  • Vehicle: Toyota Tacoma

  • Kit: GoCode TOY-11 Water Tank

  • Mounting location: Truck bed rack rail

  • Estimated installation time: 10 min

Tools & Materials

  • Slide nuts (included) 4

  • L brackets (included) 4

  • Bolts (included) 1/4-20 4

  • Wrench or socket 7/16”

Installation Instructions

  1. Slide the nuts into the rail
    Feed the slide nuts into the rail from the end, then slide them to the four mounting points where the tank will sit.

  2. Locate the threaded inserts
    The tank has preset threaded inserts, so there’s no drilling or tapping. Line the tank up with your four mounting points.

  3. Set the L brackets
    Place the long leg of each L bracket on top of the tank, over the threaded inserts.

  4. Bolt it down
    Bolt each bracket in place. Once all four points are tight, the tank is secure and ready to plumb.

Installation Video

Guide on how to install an 11-gallon water tank on a Toyota Tacoma rack.

Related Resources